A & J Washroom
Accessories
Grab Bars

Grab Bars

UG2 - Grab Bar - Snap-On Flange

Tubing - Type 304 #18 gauge stainless steel with O.D. of 1 1/4 in. #4 Satin Finish Standard. Bar Offset - 1 1/2 in clearance between the mounting surface and inside of bar to meet Federal Specification WW-P-541/8b. Concealed Snap Flange - 3 in O.D. deep drawn type 304 #22 gauge #4 satin finish stainless. #14 gauge stainless steel mounting plate is heliarc welded to bar with three mounting points.
A Option - bar attached to wall on both ends
B Option - bar attached to wall on both ends and middle.

Model Size - Type QNS PRICE
UG2A-12 12 inch - Type A $17.80
UG2A-16 16 inch - Type A $18.40
UG2A-18 18 inch - Type A $19.65
UG2A-24 24 inch - Type A $21.50
UG2A-30 30 inch - Type A $23.35
UG2A-32 32 inch - Type A $24.55
UG2A-36 36 inch - Type A $25.15
UG2A-42 42 inch - Type A $27.60
UG2A-48 48 inch - Type A $30.10
UG2B-48 48 inch - Type B $34.15
UG2B-54 54 inch - Type B $35.70
UG2B-60 60 inch - Type B $39.80
UG2B-72 72 inch - Type B $44.55

 


Looking for something you can't find? Not sure which product best fits your needs? Call us at 800-619-4737 or email us with your special needs at info@qnsdistributors.com

Grab Bar Assortment - Washroom accessories
UG20 Grab Bar - Concealed Set Screw

Tubing - Type 304 #18 gauge stainless steel with O.D. of 1 1/4 in. #4 Satin Finish Standard. Bar Offset - 1 1/2 in clearance between the mounting surface and inside of bar to meet Federal Specification WW-P-541/8b. Concealed Set Screw 3 inch O.D. deep drawn type 304 #11 gauge #4 satin finish stainless steel.#12 gauge pre-plated steel tenion plate. Flange is secured to plate by means of four 1/4 inch - 20 stainless steel tamper resistant set screw.
A Option - Attached to the wall on both ends.
B Option - Attached to the wall on both ends and middle.

Model Size - Type QNS PRICE
UG20A-12 12 inch - Type A $25.30
UG20A-16 16 inch - Type A $26.55
UG20A-18 18 inch - Type A $27.80
UG20A-24 24 inch - Type A $30.35
UG20A-30 30 inch - Type A $31.60
UG20A-32 32 inch - Type A $32.25
UG20A-36 36 inch - Type A $34.75
UG20A-42 42 inch - Type A $36.05
UG20A-48 48 inch - Type A $39.20
UG20B-48 48 inch - Type B $46.75
UG20B-54 54 inch - Type B $50.55
UG20B-60 60 inch - Type B $51.20
UG20B-72 72 inch - Type B $60.05


UG120 Grab Bar - Exposed Flange

Tubing - Type 304 #18 gauge stainless steel with O.D. of 1 1/4 in. #4 Satin Finish Standard. Bar Offset - 1 1/2 in clearance between the mounting surface and inside of bar to meet Federal Specification WW-P-541/8b. Exposed 3 inch O.D. type 304 #11 gauge #4 satin finish stainless steel with three countersunk mounting points for 1/4 inch dia fasteners. Flange is heliarc welded to form one-piece construction.
A Option - bar attached to wall on both ends
B Option - bar attached to wall on both ends and middle.

Model Size - Type QNS PRICE
UG120A-12 12 inch - Type A $17.20
UG120A-16 16 inch - Type A $17.80
UG120A-18 18 inch - Type A $19.05
UG120A-24 24 inch - Type A $20.90
UG120A-30 30 inch - Type A $22.70
UG120A-32 32 inch - Type A $23.95
UG120A-36 36 inch - Type A $24.55
UG120A-42 42 inch - Type A $27.00
UG120A-48 48 inch - Type A $29.45
UG120B-48 48 inch - Type B $32.25
UG120B-54 54 inch - Type B $33.80
UG120B-60 60 inch - Type B $35.70
UG120B-72 72 inch - Type B $42.35

 

For size and spec cut sheet, click here.



A & J Washroom Accessories carries a complete line of architectural and janitorial washroom accessories. Our soap dispensers can be surface mounted or recessed and can use liquid, lather or powder soap. Paper towel dispensers can handle C-Fold, Multifold or Roll . We carry Jetair electric hand dryers with brushless motors, adjustable or automatic timers and adjustable depth of field sensors. A & J also carries a complete line of waste receptacles, ashtrays, tilt mirrors and cabinets, toilet tissue dispensers, shelves, shower seats, grab bars and other janitorial, bath and security accessories.

QNS Distributors has been servicing the needs of commercial and industrial accounts since 1971.

We offer a full line of production and warehousing products by industry leaders, Akro-Mils and Molded Fiber Glass Tray Company. Whether your needs are large or small, QNS Distributors can handle any orders.


QNS Distributors
1164 Dennery Road, #305
San Diego, CA 92154-6431
Phone: 619-690-7478
Fax: 619-690-7488