![]() |
A &
J Washroom
|
|||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| Model | QNS Price |
| U934-1 | $250.00 |


The seating area is fabricated
3/4 in thick, one piece high density white polymer that will not
support the growth of fungi, bacteria, mildew or odor causing
microorganisms and without any chemical irritants to human skin.
Seat is chemically resistant, water impermeable, impact resistant
and virtually resistant to graffiti.
Seat secured to framing with 3/16 in. countersunk stainless steel
tamper resistant rivets for maximum safety.
There
are no exposed fasteners on the underside of the seat, which could
cause injury when not in use. Entire frame is fabricated of type
304 #18 stainless steel with a #4 satin finish. Mounting bracket
is fabricated of type 304 #18 gauge stainless steel with #11 gauge
stainless steel plates. Brackets are mounted where floor and wall
meet to support maximum load. Adjustable seat height between 17
- 19 inches per ADA guidelines.
U937-1A Size 32 in w x 20 1/4 d (R)ight or (L)eft Seat
U939-1A Size 22 in w x 14 in d
| Model | QNS Price |
| U937-1A-(R) or (L) | $262.50 |
| U939-1A | $243.75 |
Seat
is fabricated of solid one piece white high density polymers that
is warp & water resistant. #18 gauge stainless steel tubing,
type 304, 1 1/4 in square tubing makes the main frame of the seat.
Anti-slip devices prevent seat from sliding on tub rim when in use.
When not in use seat can be retracted to the up-right position against
side wall.
Overall Size: 29 in w x 15 7/8 in d
Seating Area: 29 in w x 13 3/8 in d
U936-1 Same as above only back wall mounted instead of side wall.
| Model | QNS Price |
| U935-1 | $199.35 |
| U936-1 | $184.00 |

Unit is fabricated of type
304 #16 gauge stainless steel with a #4 satin finish. Sitting area
shall have all edges and corners beveled, welded, ground smooth
and polished. A formed stainless steel support is provided inside
seat for rigidity, completely sealed in double pan back for added
support and appearance. Heavy duty stainless steel hinge is secured
to wall surface with one leg welded to 1/8" thick bracket support.
The back corner of seat is formed to a 45 angle.
Overall Size 15 in x 15 1/4 in x 15 in x 1 in thick
| Model | QNS Price |
| U930WP | $101.25 |

Seat is double pan reinforced
construction and fabricated of type 304 #16 gauge stainless steel
with a recessed heavy duty handle for convenient raising and lowering
of seat. Concealed back is fabricated of #11 gauge stainless steel.
Friction button catch holds seat in place when seat is in the up-right
position
Overall Size 16 in w x 16 in h x 2 3/4 d
Wall Opening 15 1/4 w x 15 1/4 h x 2 5/8 d
| Model | QNS Price |
| U931 | $512.15 |
15" AFF
| Model | QNS Price |
| U947CS | $257.65 |
For size and spec cut sheet, click here.
QNS
Distributors
1164 Dennery Road, #305
San Diego, CA 92154-6431
Phone: 619-690-7478
Fax: 619-690-7488