16 oz Plastic Bulb Liquid Soap Dispenser - Surface Mounted
Piston Valve Assembly: Fabricated of bright chrome plated ABS material with a stainless steel return spring that operates on a gravity feed system.
Operation: One hand, push up operation that requires less than 5 lbs of force to operate. Will dispense a pre-measured amount of soap that is drip free.
Globe: Translucent, polyethylene that is shatterproof and corrosion resistant.
Seals: Globe and piston seals are fabricated of neoprene.
Mounting Bracket: Fabricated of bright chrome plated ABS with three (3) exposed mounting points.
Overall Size: 4”W x 7”H x 5 1/4”D 102mm x 178mm x 133mm Capacity: 16 fl oz.
Place mounting bracket on wall surface at desired location. Transfer mounting points to surface making sure unit will be level. Drill pilot holes and secure unit bracket with proper fasteners per each application. Fill globe with proper soap making sure soap has been mixed properly per instructions of soap manufacturer. Secure valve to globe snugly wall openingut over-tightening damaging seals. Place globe and valve down into bracket and screw into place. Test valve for operation.
*It is not recommended to mount any soap dispenser on mirrors.
**For best performance, use pre-mixed low concentrate solutions.
Dispensers should have periodic maintenance performed to insure the life dispenser. Rinse out globe and valve with warm water to avoid sludge buildup.
Preventative Maintenance: Each dispenser should be flushed out aprx, every 30 days with warm water to prevent valve from; clogging with old soap, Abrasive cleaners should not be used when wiping down dispenser.