128 oz Single Valve Liquid Soap Dispenser w/ Shelf
Tank: Fabricated of #20 gauge stainless steel with a #4 satin finish removable for easy servicing and cleaning.
Shelf & Bracket: Fabricated of #18 gauge stainless steel. All exposed areas have a #4 satin finish. Shelf is secured to back by means of full length, stainless steel piano type hinge.
Valve: All purpose antibacterial soap valve cylinder, black molded plastic push style valve that takes less than 5 lbs of force and one hand to operate complies with barrier free guidelines when mounted at proper height.
Lock: Tamper resistant lock. Overall Size: 20”W x 3 1/4”H x 5”D 508mm x 83mm x 127mm Capacity: 128 fl oz.
Provide an area on wall surface at desired or specified location. Remove tank and place unit on mounting surface making sure bracket is level, transfer mounting points. Drill pilot holes and secure bracket to wall with proper fasteners per application. Fill tank with proper soap and install into bracket. Prime valve until soap flows freely. Close lid (shelf) and secure.
*It is not recommended to mount any soap dispenser on mirrors
** For best performance, use pre-mixed low concentrate solutions. Dispensers should have periodic maintenance performed to insure life of dispenser. Rinse out globe and valve with warm water to prevent sludge buildup.
Preventative Maintenance: Each dispenser should be flushed out aprx, every 30 days with warm water to prevent valve from; clogging with old soap, Abrasive cleaners should not be used when wiping down dispenser.