40 oz Horizontal Liquid Soap Dispenser - Surface M
Soap Tank: Fabricated of #20 ga stain less steel, #4 satin finish, fully
welded one-piece construction.
Valve: All purpose ant bacterial soap valve cylinder, black molded plastic
push style valve that takes less than 5 lbs of force and one hand to operate
complies with barrier free guidelines when mounted at proper height.
Viewer: Clear plastic window allows a constant fluid level check.
Concealed Mounting Plate: Fabricated of heavy gauge stainless steel.
Filler Cap: Fabricated of stainless steel, hinged to allow easy servicing,
secured with special key that creates a vandal resistant dispenser.
Overall Size: 8 1/4"W x 4 3/4"H x 3 314"0
210mm x 121mm x 95mm (Horizontal Mounting)
Capacity: 40 oz.
Recommend type soaps without chloric solutions for proper
Provide an area on mounting surface at desired or specified location.
Secure concealed mounting plate to wall surface with proper fasteners.
Slide dispenser down over mounting plate and secure by means of
set screw located inside tank. Fill unit with proper soap. Close lid and
secure with special key Test valve for proper operation.
•it is not recommended to mount any soap dispenser on mirrors
..For best performance, use pre-mixed low concentrate solutions.
Dispensers should have periodic maintenance performed to insure
the life dispenser. Rinse out globe and valve with warm water to avoid
Preventative Maintenance: Each dispenser should be fl ushed out aprx,
Every 30 days with warm water to prevent valve from; clogging with
old soap, Abrasive cleaners should not be used when wiping down