40 oz Vertical Liquid Soap Dispenser w/ Push-up Valve.
Soap Tank: Fabricated of #20 gauge stainless steel with a #4 satin finish,
fully welded one-piece construction.
Valve: All purpose chrome on brass, push up, one hand operational
bellows valve. Valve operates with less than 5 bs of force and when
mounted proper1y will comply with ADA code.
Viewer: Clear plastic window allows a constant fluid level check.
Concealed Mounting Plate: Fabricated of heavy gauge stainless steel.
Filler Cap: Fabricated of stainless steel, hinged to allow easy servicing
with special key that creates a vandal resistant dispenser.
Overall Size: 4 3/4'W x 10 3/S"H x 2 3/4"D
121mm x 264mm x 70mm
Capacity: 40 oz.
Provide an area on mounting surface at desired or specified location.
Secure concealed mounting plate to wall surface with proper fasteners.
Slide dispenser down over mounting plate and secure by means of
set screw located inside tank. Fill unit with proper soap. Close lid and
secure with special key Test valve for proper operation.
•it is not recommended to mount any soap dispenser on mirrors
..For best performance, use pre-mixed low concentrate solutions.
Dispensers should have periodic maintenance performed to insure
the life dispenser. Rinse out globe and valve with warm water to avoid
Preventative Maintenance: Each dispenser should be flushed out aprx
Every 30 days with warm water to prevent valve from clogging with old
soap. Do not use abrasive cleaners to clean dispenser.