16 oz Soap Dispenser, 6" Spout - Vanity Mounted
Piston & Spout: Highly polished corrosion resistant, stainless steel.
Assembly rotates 360 degrees.
Flange & Collar: One piece highly polished chrome on brass.
Valve Assembly: All purpose bellows valve, fabricated of ABS material,
with stainless steel return spring.
Shank: Chrome on brass, secured to collar. Special key provided that
unlocks collar for servicing.
Globe & Collar: High impact translucent polyethylene.
Capacity: 16 fl oz
U129PCA: Same as U129PC with 6" (152mm) spout.
Recommend type soaps without chloric solutions for proper
operation.
*All vanity soap dispensers are designed to be serviced above the
counter
U129PCA
Installation
Provide a 7/8" - 1" diameter opening in vanity or basin. Insert shank
through cut out and secure with supplied washers and wing nut.
Connect supply tube with valve making sure notch end is at bottom.
Secure globe and collar to shank. Fill globe above counter. Secure
upper assembly to shank. Prime dispenser every time unit is serviced.
•it is not recommended to mount any soap dispenser on mirrors
.. For best performance, use pre-mixed low concentrate solutions.
Dispensers should have periodic maintenance performed to insure
the life dispenser. Rinse out globe and valve with warm water to avoid
sludge buildup
Preventative Maintenance: Each dispenser should be flushed out aprx
Every 30 days with warm water to prevent valve from clogging with old
soap. Do not use abrasive cleaners to clean dispenser.