56 oz One-Piece Liquid Soap Dispenser - Surface Mounted
Cover: Fabricated of #20 ga stainless steel with #4 satin finish. unibody
design with sloped cover and refill indicator provide a heavy duty one piece
cover.
Tank: Molded, translucent Lexon tank, shatterproof and corrosion
resistant. Large opening for easy servicing and covered sides prevent
spillage.
Valve: (U001-TAP) Theft resistant chrome on brass all purpose bellows
type soap valve, with chrome on brass hex nut. Neoprene seals and a
stainless return spring will provide a pre-measured, drip free dispensing
system. Valve cannot be removed without taking hex nut off.
Hinges: Full length, heavy duty, stainless steel piano type hinge.
Lock: Pin tumbler, commercial quality type lock is keyed like all other AJW
cabinets.
Overall Size: 8 3/4'W x 6 3/4"H x 6 3/8"0
222mm x 171mm x 161mm
Capacity: 56 fl ounces
U133
Installation
Coordinate installation with architect and contractor to avoid
interference with pipes vents etc. in wall. Place unit on wall surface and
make sure unit is level. Open cabinet and transfer mounting points.
Drill pilot holes and secure with proper fasteners per application. Fill
Lexon tank with proper soap. Close cabinet and secure with key.
Soaps All purpose low viscosity lotions and liquid synthetic detergents
or oils, and vegetable based soaps should be used.
Preventative Maintenance: Each dispenser should be cleaned out
aprx every 30 days with warm water to prevent sludge build up from
clogging valve. Do not use abrasive cleaners when cleaning dispenser.
•it is not recommended to mount any soap dispenser on mirrors
.. For best performance, use pre-mixed low concentrate solutions.
Dispensers should have periodic maintenance performed to insure
the life dispenser. Rinse out globe and valve with warm water to avoid
sludge buildup