40 oz Automatic Liquid Soap Dispenser - Surface Mount
Body & Back: Fabricated of white high impact plastic material with a
smooth design and curves. Hidden security locking mechanism prevents
vandalism. (Special key provided) Cover is equipped with a clear viewer to
allow a constant soap level check.
Bottle: Convenient filler cap on bottle allows easy servicing of dispenser.
Bottle is equipped with flexible valve assembly. (Bag in a box not required)
Sensor: Hands free sensor provides easy operation by passing hands
through activation field. A pre-measured amount of soap will dispense. Unit
is operated by three (3) ·c· batteries, not provided, Alkaline batteries are
recommended for best performance. When property mounted dispenser
will comply with ADA code. Green light indicates power, red light indicates
Overall Size: 4 3/S'W x 10 3/S'H x 4 1/4"D
111mm x 264mm x 108mm
Capacity: 1 OOOml (aprx 40oz)
If mounting on wall surface, transfer mounting hole dimensions from
back of unit to wall surface. Drill pilot holes and secure unit to surface
with proper fasteners. Sensor cannot be any higher than 40' above
finished floor to comply with ADA code.
•it is not recommended to mount any soap dispenser on mirrors
.. For best performance, use pre-mixed low concentrate solutions.
Dispensers should have periodic maintenance performed to insure
the life of the dispenser. Rinse out bottle and valve with warm water to
prevent sludge buildup.
Preventative Maintenance: Each dispenser should be flushed out aprx
Every 30 days with warm water to prevent valve from clogging with old
soap. Do not use abrasive cleaners to clean dispenser.