Automatic 120 Volt Hand Dryer, Satin Finish - Surface Mounted
Motor: Brushless, 1/8 hp, 3450 RPM capacitor initiated with nonlubricating
bearings and thermally protected against over heating. 66.1 dB.
Fan: Dynamically balanced to eliminate vibration & noise.
Heating Element: Dynamically balanced to eliminate vibration &noise.
2300 watt nichrome coil would element on state of the art convective
cooling system. Ambient temp produced at nozzle is 70 degrees F.(21 C)
Unit is protected by an integral thermal safety circuit breaker.
Timer: Fully enclosed, non-mechanical timer, that automatically turns off
when hands are moved away from path of sensor.
Electric Eye: Sensor allows a hands free operation. When sensor beam
path is disturbed, dryer will automatically turn on. When hands move away
from beam, dryer stops.
Cover: Fabricated of #18 ga stainless steel, #4 satin finish, spot welded
to form one piece un body construction. Cover is secured to base with
two tamper resistant fasteners. Special key provided to remove cover. All
seams polished smooth.
Nozzle: Fixed chrome plated nozzle that can be changed from fixed to 2
position in the field.
Base: One piece #14 ga steel with 3/4” returns to wall surface for
maximum strength and rigidity.
Unit Volts Amps Cycles Cover
Overall Size: 12 5/16”W x 8 1/2”H x 7”D
313mm x 216mm x 178mm
Coordinate installation with contractor, architect and licensed
electrician. Transfer mounting points to wall surface with supplied
templates. Check all code requirements for proper mounting heights.
Secure base with proper fasteners for each application. Properly
connect power supply to dryer. Test dryer for operation. Secure cover
to base with supplied theft resistant fasteners(2).Test dryer again after
cover is secured. Dryers have a full five (5) year warranty to original
purchaser against defective materials and workmanship. Unit must be
installed by a qualified licensed electrician.
Mounting Hands Hair
Men 46” (1168mm) 73” (1854mm)
Women 44” (1118mm) 68” (1727mm)
Physically Impaired 38” (965mm) 46” (1168mm)
Children 6-10 34” (864mm) 43” (1092mm)
Children 11-14 42” (1067mm) 56” (1422mm)
*Above are recommended mounting heights from lower mounting point
above the finished floor.