32 Oz Vertical Liquid Soap Dispenser - Surface Mounted
Globe: Fabricated of translucent shatterproof, corrosion resistant
polyethylene with a smooth curved design.
Valve Assembly: Fabricated of high Impact plastic, corrosion resistant
ABS material with a stainless steel return spring. Dispensers premeasured
amounts of soap to prevent waste. Valve will dispense most
liquids and lotions. (Not pumice soaps) Push-up valve, one-hand operation
design requires less than 5 bs. of force to activate. When properly
mounted dispenser will comply with ADA code.
Mounting Bracket & Valve Cover: Fabricated of highly polished chrome
plated ABS material.
Overall Size: 4'W x 9 7/S'H x 4 1/S"D
102mm x 251mm x 105mm
Capacity: 32 oz.
If mounting on wall surface, transfer mounting hole dimensions as
shown on drawing. Drill pilot holes and secure unit to surface with
proper fasteners. Push up valve cannot be any higher than 40' above
finished floor to comply with ADA code.
•it is not recommended to mount any soap dispenser on mirrors
.. For best performance, use pre-mixed low concentrate solutions.
Dispensers should have periodic maintenance performed to insure
the life of the dispenser. Rinse out tank and valve with warm water to
prevent sludge buildup.
Preventative Maintenance: Each dispenser should be flushed out aprx
Every 30 days with warm water to prevent valve from clogging with old
soap. Do not use abrasive cleaners to clean dispenser.