Cabinet Body: Fabricated of #20 ga steel, formed for rigidity with multiple
mounting points. Side viewers allow paper level check.
Door: Fabricated of high impact translucent plastic to give a constant
paper level check. Each cabinet is secured with a special keyed lock.
Mechanism: Internal mechanism is fabricated of high impact plastic.
Manual side rotating knob with finger grips allow maintenance dept. to
manually start paper being dispensed. Once the paper has been started,
one hand operation to pull paper out allowing concealed roller to create a
perforation. This will allow the operator to tear the paper off with little force.
When paper is torn, a starter piece will be partially exposed for the next
towel to be dispensed without having to touch a lever, handle or button.
Overall Size: 10 1/2'W x 15 3/4"H x 8 5/8"0
268mm x 400mm x 219mm
Capacity: One standard size roll of 8" or 9" wide. (Use only non-perforated
towels). One stub roll up to 2 314" OD
*600ft roll recommended for best results.
U199HF
Installation
Coordinate installation with contractor or architect for proper mounting
height and location. Open cabinet door and transfer mounting points
to wall Pre-drill mounting points with pilot holes. Secure cabinet
with proper fasteners per application. Insert roll towel and manually
advance paper. Pull the paper to test operation. If dispenser operates
correctly, close cabinet door and secure. Test dispenser again after
filling cabinet. Manual knob may also be used to clear paper jams if
they occur.