C-fold/Multifold Towel Dispenser - Recessed
Cabinet Body: Fabricated of #22 ga stainless steel. Face trim is an
integral part of body with a #4 satin finish and 1/4" returns to wall surface
for rigidity. One piece construction without miters or welds.
Cabinet Door: Fabricated of #22 ga stainless steel with a #4 satin finish.
Full length door stops protect door from vandalism.
Cabinet Back: Fabricated of #22 ga stainless steel with multiple welds to
Towel Dispensing: Hemmed edges that prevent injury and towel tearing.
Hinges: Heavy duty, full length, stainless steel piano type hinge secured
door to cabinet.
Lock: Commercial quality, pin tumbler type lock keyed like all other AJW
Collars: Fabricated of #22 ga stainless steel finished to match cabinet for
surface or recess mounting.
Overall Size: 14 1/4'W x 18'W x 4 1/4"D
362mm x 457mm x 108mm
Wall Opening: 123/4"Wx16 1/2"H x 4"D
324mm x 419mm x 102mm
U232-S2: 2' semi-recessed collar, 2' wall opening 51mm.
U232-SM: Full surface mounted collar.
Capacity: 350 c-fold or 475 multifold
Coordinate installation with architect and contractor to avoid
interference with pipes vents etc. in wall. Provide a rough wall opening
12 3/4"W x 16 1/2"H. See specification for proper wall depth opening.
Slip on collars now if collars are required Open cabinet and insert into
wall opening. Secure with proper fasteners per each application. Fill
unit with recommended towels, without overfilling. Make sure towels
overlap each other so they will be available each time a towel is
removed from dispensing area.
Do not use abrasive cleaners or chloric solutions to clean cabinets.