Cabinet Body: Fabricated of #22 ga stainless steel. Face trim is an
integral part of body with a #4 satin finish and 1/4" returns to wall surface
for rigidity. One piece construction without miters or welds.
Uni-Door: Fabricated of #18 ga stainless steel with a #4 satin finish with
1/2" returns to wall for rigid ity. Full length one piece door with 1/2" returns
inside cabinet to prevent injury when reaching for towels.
Cabinet Back: Fabricated of #22 ga stainless steel with multiple welds to
Towel Dispensing: Hemmed edges that prevent injury and towel tearing.
Hinges: Heavy duty, full length, stainless steel piano type hinge.
Locks: Commercial quality, pin tumbler keyed alike.
Collars: Fabricated of #22 ga stainless steel finished to match cabinet for
surface or recess mounting.
Overall Size: 14 1/2'W x 18 1/4'W x 4 114'0
368mm x 464mm x 108mm
Wall Opening: 123/4"Wx16 1/2"H x 4"0
324mm x 419mm x 102mm
U2324-S2: 2" semi-recessed collar, 2" wall opening 51 mm.
U2324-SM: Full surface mounted collar.
Capacity: 350 c-fold or 475 multifold
Coordinate installation with architect and contractor to avoid
interference with pipes vents etc. in wall. Provide a rough wall opening
12 3/4"W x 16 1/2"H. See specification for proper wall depth opening. If
collar is required, slip collar over back of unit. Open cabinet and insert
into wall opening. Secure with proper fasteners per each application
Fill unit with recommended towels, without overfilling. Make sure
towels overlap each other so they will be available each time a towel is
removed from dispensing area.