12 Gallon Waste Receptacle w/ 4" Extended Waste - Recessed


Body: Fabricated of #22 ga stain less steel with #4 satin finish on all
exposed areas.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet.
One piece construction without miters or welds with 1/4" returns to wall
surface for maximum strength.
Back: Fabricated of stainless steel formed for rigidity with multiple welds to
cabinet body to form a one-piece construction.
Removable Waste: #22 ga stainless steel with #4 satin finish with
hemmed edges and radius comers. Hook tabs allow liner to be installed
are an integral part of waste can. Waste is secured in place by tumbler lock
and bottom hanger. (12 gallon capacity)
Lock: Pin tumbler, commercial quality, keyed Ike all other AJW cabinets.
Collars: #22 ga stainless steel, sized & finished to match cabinet. (Used
for surface mounting & semi-recessing)
Overall Size: 17 1/4'W x 30"H x 8 1/4"0 (4" extended waste)
438mm x 762mm x 203mm
Wall Opening: 15 3/4"W x 28 1/2"H x 4"0
400mm x 724mm x 102mm
U410-S2: semi-recessed 2" collar(2" wall open.,51 mm)
U410-SM: Surface mounting collar
Waste Capacity: 12 gallons (1.6 cu ft}
-VL 1: Reusable vinyl liner
-CV: Covered Waste



Coordinate installation with architect and contractor. Provide a wall
opening 15 3/4'W x 28 1/2"H. Wall depth will vary if collars are
required. Remove waste from cabinet and insert into opening Secure
unit with proper fasteners for each application. Make sure each unit is
plumb and true. Secure unit in cabinet by locking in place by tumbler
lock. Liners may be installed. (VL 1 Re-usable liner)
If semi-recessed cabinets are required see specification for wall