C-fold/Multifold Towel Dispenser & Waste Receptacle Combination - Recessed


Body: Fabricated of #22 ga stain less steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel with #4 satin finish and 1/4"
returns to wall. (No miter or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Cabinet Door: Fabricated of #22 ga stainless steel with #4 satin finish with
full length door stop to prevent vandalism
Towel Dispenser: Dispensing area has hemmed edges to prevent injury
and towel tearing.
Removable Waste: Removable waste with hemmed edges.
Hinges: Heavy duty, full length, stainless steel piano type hinge.
Lock: Pin tumbler commercial quality keyed I ke all other AJW cabinets.
Collars: Fabricated of #22 ga stainless steel finished to match cabinet
Overall Size: 14 1/4'W x 18"H x 41/4"0
362mm x 457mm x 108mm
Wall Opening: 123/4"Wx 16 1/2"H x 4"0
324mm x 419mm x 102mm
U618-S2: semi-recessed. with 2" collar. (2" wall open., 51mm)
U618-SM: Surface mounted with full skirt
Towel Capacity: 100 c-fold or 150 multifold
Waste Capacity: 1.5 gallons (.20 cu ft)
-VL3: Reusable vinyl liner



Coordinate installation with contractor and architect to avoid
interference with pipes vents etc. Provide a rough wall opening 12
3/4"W x 16 1/2"H. Wall opening depth will depend on style mounting
Remove waste to install unit in opening. Slip collars on back of cabinet
now if required. Make sure cabinet will sit flush in wall and secure with
proper fasteners per application. Install waste back into cabinet and
load paper towels.
When cleaning cabinet, use a soft cloth or towel and do not use
abrasive or chloric cleaners.