Body: Fabricated of #22 ga stain less steel with a #4 satin finish.
Flange: Fabricated of #18 ga stainless steel with #4 satin finish and 1/4"
returns to wall. (No miter or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Uni-Door: Fabricated of #18 ga stainless steel with #4 satin finish with full
length door stop to prevent vandalism
Towel Dispenser: Dispensing area has hemmed edges to prevent injury
and towel tearing.
Removable Waste: Removable waste with hemmed edges.
Hinges: Heavy duty, full length, stainless steel piano type hinge.
Lock: Pin tumbler commercial quality keyed I ke all other AJW cabinets.
Collars: Fabricated of #22 ga #4 satin finish stainless steel finished to
match cabinet body.
Overall Size: 14 1/2'W x 18 1/4"H x 4 1/4"0
368mm x 463mm x 108mm
Wall Opening: 123/4"Wx16 1/2"H x 4"0
324mm x 419mm x 102mm
U6184-S2: semi-recessed. with 2" collar. 2" wall opening (51mm)
U6184-SM: Surface mounted with full skirt.
Towel Capacity: 100 c-fold or 150 multifold
Waste Capacity: 1.5 gallons (.20 cu ft)
-VL3: Reusable vinyl liner
Coordinate installation with contractor and architect to avoid
interference with pipes vents etc. Provide a rough wall opening 12
3/4"W x 16 1/2"H. Wall opening depth will depend on style mounting
Remove waste in install unit in opening. At this time if collars are
required, install collars on units. Make sure cabinet will sit flush in wall
and secure with proper fasteners per application. Install waste back
into cabinet and load paper towels.
When cleaning cabinet, use a soft cloth, a non-abrasive or chloric