Body: Fabricated of #22 ga stainless steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet with
1/4" returns, (No miters or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Cabinet Doors: Fabricated of#22 ga stainless steel with #4 satin finish,
with full length door stop to reduce vandalism
Towel Dispenser: Roll towel mechanism is fabricated of #20 ga steel
fonned for rigidity, Unit will accommodate one 8' or 9" wide roll with a max
OD of 7 7/8", Towel length dispensed has three adjustable settings, Lever
is activated with one hand and less than 5 lbs of force.
Waste: Fabricated of#22 ga stainless steel with all leading edges
hemmed. Unit is equipped with wire handle for easy handling.
Hinge: Full length, stainless steel piano type hinge.
Locks: Pin tumbler commercial quality lock,
Collars: Fabricated of #22 ga stainless steel, finished to match cabinet.
Overall Size: 14 1/4'W x 48'H x 10 114"D
362mm x 1219mm 260mm
Wall Opening: 12 3/4"W x461/2"H x 10'D
324mmx 1181mm x 254mm
Waste Capacity: 8.5 gallons (1.16 cu ft)
Towel Capacity: One standard size roll of 8' or 9' wide. (Use only nonperforated
towels). One stub roll up to 2 3/4" OD
*Recommended 600ft roll for best results.
-VL 1: Reusable vinyl liner



Coordinate installation with architect and contractor to avoid
interference with pipes, vents, etc. Provide a rough wall opening 12
3/4"W x 46 1/2'H, Required wall depth, will depend if full or semi
recessing is required, If collar is required, slide collar over the back
before installing into wall, Remove waste from cabinet and mount
unit plumb and true in opening with proper fasteners per application.
Secure waste in cabinet and load paper towels, Controls and or
mechanisms should operate with one hand and force required to
activate controls shall be no greater than 5 lbs, (4.27.4)
U646AW-S2 2" Semi-Rec, collar, 8"wall opening, 203 mm
U646AW-S4 4" Semi-Rec, collar, 6" wall opening, 152 mm
U646AW·S6 6" Semi-Rec, collar, 4" wall opening, 102 mm
U646AW-SM: Full surface mounted collar
When cleaning cabinet, use a soft cloth, a non-abrasive or chloric

Mailing Address​

1375 Eber Street

San Diego, CA 92107-3812


T: 619-501-9602

Fax: 619-501-9603


QNS Distributors has been servicing the needs of commercial and industrial accounts since 1971. We offer a full line of production and warehousing products by industry leaders, Akro-Mils and Molded Fiber Glass Tray Company. 

Whether your needs are large or small, QNS Distributors can handle any order!

© Elias Consultancy 2020