C-fold/Multifold Towel Dispenser & Waste Receptacle Combination w/ Extended Waste - Recessed


Body: Fabricated of #22 ga stainless steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet with
1/4" returns. (No miters or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Cabinet Door: Fabricated of #22 ga stainless steel with #4 satin finish.
Towel Dispenser: Fabricated of #22 ga stainless steel with hemmed
edges to prevent injury and towel tearing.
Removable Waste: Fabricated of #22 ga stainless steel #4 satin finish
with all leading edges to have a radius. Unit is secured in place by a
bottom bracket guide and top lock.
Hinge: Full length, heavy duty, stainless steel piano type hinge.
Locks: Pin tumbler commercial quality, keyed like all other AJW cabinets.
Collars: Fabricated of #22 ga stainless steel, finished to match cabinet.
(Used when fu ll recessing cannot be accomplished)
Overall Size: 17 1/4'W x 54"H x 8 1/4"0
438mm x 1372mm x 210mm
Wall Opening: 15 3/4"W x 52 1/2"H x 4"0
400mm x 1334mm x 102mm
U650-S2: semi-recessed. with 2" collar, 2" wall opening 51mm
U650-SM: Full surface mounted collar.
Towel Capacity: 600 c-fold or 800 multifold
Waste Capacity: 12 gallons (1.6 cu ft)
-VL 1: Vinyl Liner



Coordinate installation with architect and contractor to avoid
interference with pipes, vents, etc. Provide a rough wall opening
15 3/4"W x 52 1/2"H. See chart for required wall depth If collar is
required, slide collar over the back before installing into wall. Remove
waste from cabinet and mount unit plumb and true in opening with
proper fasteners per application. Secure waste in cabinet and load
paper towels.
When cleaning cabinet use a non abrasive non-ehloric solution and
wiped off with the grain of the cabinet.