Lever Operated Roll Towel Dispenser & Waste Receptacle Combination w/ Extended Waste - Recessed


Body: Fabricated of #22 ga stainless steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet with
1 /4" returns. (No miters or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Cabinet Door: Fabricated of #18 ga stainless steel with #4 satin finish,
with full length door stop to reduce vandalism
Towel Dispenser: Roll towel mechanism is fabricated of #20 ga steel
fonned for rigidity. Unit will accommodate one 8" or 9" wide roll with a max
0.0. of 7 7/8". Towel length dispensed has three adjustable settings. Lever
is activated with one hand and less than 5 lbs of force to activate.
Removable Extended Waste: Fabricated of #22 ga stainless steel #4
satin finish with all leading edges to have a radius. Unit is secured in place
by a bottom bracket guide and top lock. Embossed tabs allow liners to be
held in place.
Hinge: Full length, heavy duty, stain less steel piano type hinge.
Collars: Fabricated of #22 ga stainless steel, finished to match cabinet.
(semi-recessed and surface mounted}
Overall Size: 14 1/4'W x 54"H x 10"0
362mm x 1372mm x 254mm
Wall Opening: 12 3/4"W x 52 1/2"H x 4"0
324mm x 1334mm x 102mm
U659-S2: 2" semi-recessed. collar, 2" wall opening, 51mm
U659-SM: Full surface mounted collar.
Towel Capacity: One standard size roll of 8" or 9" wide. (Use only nonperforated
towels}. One stub roll up to 2 3/4" OD
Waste Capacity: 12 gallons (1.60 cu ft)
*Recommend 600ft roll for best results.
-VL 1: Reusable vinyl liner



Coordinate installation with architect and contractor to avoid
interference with pipes, vents, etc. Provide a rough wall opening 12
3/4"W x 52 1/2"H. Required wall depth, will depend if full or semirecessing
is required. If collar is required, slide collar over the back
before installing into wall. Remove waste from cabinet and mount
unit plumb and true in opening with proper fasteners per application.
Secure waste in cabinet and load paper towels.
Controls and or mechanisms should operate with one hand and force
required to activate controls shall be no greater than 5 lbs. (427.4)

Mailing Address​

1375 Eber Street

San Diego, CA 92107-3812


T: 619-501-9602

Fax: 619-501-9603


QNS Distributors has been servicing the needs of commercial and industrial accounts since 1971. We offer a full line of production and warehousing products by industry leaders, Akro-Mils and Molded Fiber Glass Tray Company. 

Whether your needs are large or small, QNS Distributors can handle any order!

© Elias Consultancy 2020