Automatic Roll Towel Dispenser & Waste Receptacle Combination w/ Extended Waste - Recessed
Body: Fabricated of #22 ga stainless steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet with
1 /4" returns. (No miters or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Cabinet Door: Fabricated of #22 ga stainless steel with #4 satin finish,
with full length door stop to reduce vandalism
Towel Dispenser: Roll towel mechanism is fabricated of HOP material.
Unit will accommodate one 8" or 9" wide roll with a max 0.0. of 7 7/8".
Towel length dispensed has three adjustable settings. Battery operated
sensor provides a hands free operation (batteries not included).
Removable Extended Waste: Fabricated of #22 ga stainless steel #4
satin finish with all leading edges to have a radius. Unit is secured in place
by a bottom bracket guide and top lock. Embossed tabs allow liners to be
held in place.
Hinge: Full length, heavy duty, stain less steel piano type hinge.
Collars: Fabricated of #22 ga stainless steel, finished to match cabinet.
(semi-recessed and surface mounted}
Overall Size: 17 1/4'W x 54"H x 12"0
438mm x 1372mm 305mm
Wall Opening: 15 3/4"W x 52 1/2"H x 10"0
400mm x 1334mm x 254mm
Waste Capacity: 17 gallons (2.15 cu ft)
Towel Capacity: One standard size roll of 8" or 9" wide. (Use only nonperforated
towels}. One stub roll up to 2 314" OD
*Recommended 600ft roll for best results.
Coordinate installation with architect and contractor to avoid
interference with pipes, vents, etc. Provide a rough wall opening 15
3/4"W x 52 1/2"H. Required wall depth, will depend if full or semirecessing
is required. If collar is required, slide collar over the back
before installing into wall. Remove waste from cabinet and mount
unit plumb and true in opening with proper fasteners per application.
Secure waste in cabinet and load paper towels and batteries. Test unit
for proper operation. Controls and or mechanisms should operate with
one hand and force required to activate controls shall be no greater
than 5 lbs. (4.27.4)
U660EA-S2: Semi-Rec. with 2" collar, 8"wall opening,203mm
U660EA-S4: Semi-Rec. with 4" collar, 6"wall opening,152mm
U660EA-S6: Semi-Rec. with 6" collar, 4"wall opening,102mm
U660EA-SM: Full surface mounted collar.