Lever Operated Roll Towel Dispenser & Waste Receptacle Combination w/ Extended Waste & Utility Shelf - Recessed
Body: Fabricated of #22 ga stain less steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet with
1 /4" returns. (No miters or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Cabinet Door: Fabricated of #22 ga stainless steel with #4 satin finish,
with full length door stop to reduce vandalism
Towel Dispenser: Roll towel mechanism is fabricated of#20 ga steel
formed for rigidity. Unit will accommodate one 8' or 9" wide roll with a max
0.0. of 7 7/8". Towel length dispensed has three adjustable settings. Lever
is activated with one hand and less than 51bs of force to activate.
Removable Exttended Waste: Fabricated of #22 ga stainless steel #4
satin finish with all leading edges to have a radius. Unit is secured in place
by a bottom bracket guide and top lock. Embossed tabs allow liners to be
held in place.
Hinge: Full length , heavy duty, stain less steel piano type hinge.
Collars: Fabricated of #22 ga stainless steel, finished to match cabinet.
(semi-recessed and surface mounted}
Overall Size: 17 1/4'W x 54'H x 14 1/4' 0
438mm x 1372mm 362mm
Wall Opening: 15 3/4"W x 52 1/2"H x 10'0
400mm x 1334mm x 254mm
Waste Capacity: 13 gallons (1.7 4 cu ft)
Towel Capacity: One standard size roll of 8' or 9' wide. (Use only nonperforated
towels}. One stub roll up to 2 3/4" OD
*Recommended 600ft roll for best results.
-VL 1: Reusable vinyl liner
Coordinate Installation with architect and contractor to avoid
interference with pipes, vents, etc. Provide a rough wall opening 15
3/4'W x 52 1/2"H. Required wall depth, will depend if full or semirecessing
is required. If collar is required, slide . collar over the back
before installing into wall. Remove waste from cabinet and mount
unit plumb and true in opening with proper fasteners per application.
Secure waste in cabinet and load paper towels. Controls and or
mechanisms should operate with one hand and force required to
activate controls shelf be no greater than 5 bs. (4.27.4)
U661AW·S2 2'' Semi-Rec. collar, 8" wall opening, 203 mm
U661AW-S4 4" Semi-Rec. collar, 6" wall opening, 152 mm
U661AW-S6 6" Semi-Rec. collar, 4" wall opening, 102 mm
U661AW-SM: Full surface mounted collar.