Automatic Roll Towel Dispenser & Waste Receptacle Combination w/ Extended Waste & Utility Shelf - Recessed


Body: Fabricated of #22 ga stainless steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet with
1 /4" returns. (No miters or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Cabinet Door: Fabricated of #22 ga stainless steel with #4 satin finish,
with full length door stop to reduce vandalism
Towel Dispenser: Roll towel mechanism is fabricated of#20 ga steel
formed for rigidity. Unit will accommodate one 8' or 9" wide roll with a
max 0.0. of 7 7/8'. Towel length dispensed has three adjustable settings.
Battery operated sensor provides a hands free operation. (batteries not
Removable Waste: Fabricated of #22 ga stainless steel #4 satin finish
with all leading edges to have a radius. Unit is secured in place by a
bottom bracket guide and top lock. Embossed tabs allow liners to be held
in place.
Hinge: Full length, heavy duty, stainless steel piano type hinge.
Collars: Fabricated of #22 ga stainless steel, finished to match cabinet.
Overall Size: 17 1/4'Wx 54"H x 14 1/4'D
438mm x 1372mm x 362mm
Wall Opening: 15 3/4"W x 52 1/2"H x 10"0
400mm x 1334mm x 254mm
Waste Capacity: 13 gallons (1.7 4 cu ft)
Towel Capacity: One standard size roll of 8" or 9" wide. (Use only nonperforated
towels}. One stub roll up to 2 3/4" OD
*Recommended 600ft roll for best results.
-VL 1: Reusable vinyl liner



Coordinate Installation with architect and contractor to avoid
interference with pipes, vents, etc. Provide a rough wall opening 15
3/4"W x 52 1/2"H. Required wall depth, will depend if full or semirecessing
is required. If collar is required, slide . collar over the back
before installing into wall. Remove waste from cabinet and mount
unit plumb and true in opening with proper fasteners per application.
Secure waste in cabinet and load paper towels and batteries. Test unit
for proper operation. Controls and or mechanisms should operate with
one hand and force required to activate controls shelf be no greater
than 5bs. (4274)
U661 EAS2: 2· Semi-Rec. collar, s· wall opening, 203 mm
U661 EA-S4: 4" Semi-Rec. collar, 6" wall opening, 152 mm
U661 EA-S6: 6" Semi-Rec. collar, 4" wall opening, 102 mm
U661 EA-SM: Full surface mounted collar.