Body: Fabricated of #22 ga stain less steel with a #4 satin finish.
Flange: Fabricated of #22 ga stainless steel finished to match cabinet with
1 /4" returns. (No miters or welds)
Cabinet Back: Fabricated of stainless steel formed for rigidity with multiple
welds to cabinet body.
Towel Mechanism: Full width body push bar allows easy operation of
mechanism that operates under 5 lbs of force. Push bar can be operated
with user's hand, elbow or forearm.
Removable Waste: Fabricated of #22 ga stainless steel #4 satin finish
with all leading edges to have a radius. Unit is secured in place by a
bottom bracket guide and top lock.
Collars: Fabricated of #22 ga stainless steel, finished to match cabinet
when full recessing is not poss ble.
Overall Size: 17 1/4'W x 54"H x 14 1/4"D
438mm x 1372mm x 362mm
Wall Opening: 15 3/4"W x 521/2"H x 10•0
400mm x 1334mm x 254mm
U661FL·S2: 2" semi-recessed. collar, s• wall opening, 203 mm
U661 FL-54: 4" semi-recessed. collar, 6" wall opening, 152 mm
U661 FL-S6: 6" semi-recessed. collar, 4" wall opening, 102 mm
U661 FL-SM: Full surface mounted collar.
Towel Capacity: One standard size roll of 8" or 9" wide. (Use only nonperforated
towels}. One stub roll up to 2 3/4" OD
*Recommended 600ft roll for best results
Waste Capacity: 12 gallons (1.6 cu ft)
-VL 1: Reusable vinyl liner
Coordinate Installation with architect and contractor to avoid
interference with pipes, vents, etc. Provide a rough wall opening 15
3/4"W x 52 1/2"H. Required wall depth, will depend if full or semirecessing
is required. If collar is required, slide . collar over the back
before installing into wall. Remove waste from cabinet and mount
unit plumb and true in opening with proper fasteners per application.
Secure waste in cabinet and load paper towels. Controls and or
mechanisms should operate with one hand and force required to
activate controls shelf be no greater than 5 bs. (4.27.4)