Frame: Fabricated of #18 ga stainless steel, #4 satin finish. 3/4" x 3/4"
frame with welded mitered comers are ground and polished smooth. #22
ga concealed ''"l:' channel is spot welded to frame for greater rigidity.
Mirror: 1/4" thick type 1 transparent flat type, class 1 - clear glass mirrors.
Mirror is coated with silver and sealed with a uniform electrolytic copper
plating, along with two coats of paint for added protection. Mirrors are
guaranteed against silver spoilage for a period of 15 years. Mirrors
conform toASTM C1036 andASTM C1503-R8.
Shelf: #18 ga stainless steel with #4 satin finish. Shelf is 5"0 x full width of
mirror. All edges are turned down 1/2" with front edge turned back 1/2" for
rigidity and prevents possible injury. #18 ga support bracket is welded to
both frame and shelf then ground smooth.
Filler: 3/16" thick full size, shock absorbing, water resistant, non-abrasive
polyethylene padding protects all concealed mirror surfaces.
Back: #20 ga pre-plated galvanized steel, with embossed horizontal
louver mounting brackets. Embossed theft resistant pressure activated
clip lock device, locks mirror in place to wall hangers.
Hangers: Fabricated of#20 ga pre-plated galv. steel.
Standard Sizes Available {W x H): 1s·x24", 16"x30', 18"x24", 1s·x30·. 18"x36",
24"x30". 24"x36.
Options
LG Laminated Glass
LX Polycarbonate
PM Plastic Acrylic
T Tempered Glass
vc Vinyl Clad (Safety Glass)
88 #S Reflective Stainless Steel
'Stainless steel minors ref2ect images in different optic quality than plate glass. There win be a slight distortion which
increases proportionately with the mWror size. Therebe. AJW Architectural Products- cannot be held responsible for quality
oli'nage.
•"Minors are &"wa'fS ordered Width x Height
'""'Reoorrwnended max size for 88 mirrors: 72" x 47-112"
'""'~framed mirrors ate fabricated to a tolerance of (+I-) 1/8"
•""'""' Minors oonform to Federal Specifications OO-M-0041 t b & DO-g-54 t O

U705-1630

$60.70Price

Coordinate installation with architect I contractor for specific mounting
location and height for each mirror application. Making sure "I" bracket
is level, transfer all mounting point locations to wall surface from
drawing. Secure brackets with proper fasteners for each application.
Slide mirror down over horizontal brackets until clip lock secures mirror
in place. Mirror can only be removed by inserting tool through hole at
bottom of frame depressing clip This will allow mirror to slide up over
brackets. Fillers are available if mirrors are mounted above and below
tile line. (U004 Filler) filler material will match mirror frame to form a
one piece construction.
To meet ADA Code, bottom edge of reflective surface can be no higher
than 40" above finished floor. (4 19 6) Full length mirrors may be used
for universal application when installed in correct locations.
Abrasive cleaners & chloric solutions should not be used on mirrors.
Discoloring and /or scratching of frame and reflective surface may
occur.

Mailing Address​

1375 Eber Street

San Diego, CA 92107-3812

CONTACT US

T: 619-501-9602

Fax: 619-501-9603

JOIN OUR MAILING LIST

QNS Distributors has been servicing the needs of commercial and industrial accounts since 1971. We offer a full line of production and warehousing products by industry leaders, Akro-Mils and Molded Fiber Glass Tray Company. 

Whether your needs are large or small, QNS Distributors can handle any order!

© Elias Consultancy 2020