Mirror: 1/4" thick type 1 transparent flat type, class 1 - clear glass mirrors.
Mirror is coated with silver and sealed with a uniform electrolytic copper
plating, along with two coats of paint for added protection. Mirrors are
guaranteed against silver spoilage for a period of 15 years. Mirrors
conform toASTM C1036 and ASTM C1503-R8.
Frame: #18 ga stainless steel with a #4 satin finish. (1/2" x 1/2" x 1 314"
Backing: 1/4" thick tempered Masonite backing strips.
Optional Surfaces & Sizes:
-PM: Plastic Mirrors (84" x 84" max size for 1 piece of glass)
-PG: Plate Glass (Floor) (84" x 84" max size for 1 piece of glass)
-LG: Laminated Glass (84" x 84" max size for 1 piece of glass)
-T: Tempered Mirror (84" x 84" max size for 1 piece of glass)
-VC: Vinyl Clad (84" x 84" for 1 piece of glass)
When mirrors are fabricated with multiple pieces of glass, size of
each piece must be specified.
Mirrors are always ordered Width x Height
Fabricated to a tolerance of± 1/8"
Mount the bottom channel at desired or specified location. Place a
level across the channel to make sure mirror will be level. Place glass
and Masonite strips (vertical) in channel and check with level again.
Clips are required on the top for securing mirror properly. (SCL-J:
stainless steel clips)