Dual Hooded Toilet Tissue Dispenser w/Auto Reserve - Surface Mounted - Non-Controlled
Body: Fabricated of #22 ga stainless steel with #4 satin finish. Concealed
inner dispensing mechanism is #18 ga stainless steel.
Back: Fabricated of #18 ga stainless steel with multiple welds to cabinet
body forming a one piece construction.
Hood: Fabricated of #18 ga stainless steel finished to match cabinet body.
Hood is secured with stainless steel hinge rivets to cabinet body. Top roll of
tissue will not drop down unless the bottom roll has been depleted. When
unit is closed, this will provide a theft resistant, non-control operation and
Locks: Pin tumbler, commercial quality locks keyed like all other AJW
Spindles: (UOOS) Fabricated of one-piece molded high impact black ABS
Overall Size: 6'W x 12"H x 6 314"0
152mm x 305mm x 171mm
Capacity: Two standard rolls with a 5 1/4" (133mm) OD ..
Provide an area on mounting surface at desired or specified location.
Open cabinet, remove spindles and hold unit to wall at desired
location. Transfer mounting points and drill pilot holes. Secure unit with
proper fasteners per each application. Load toilet tissue on rollers,
place in concealed track and close hood. Raise lower roll against
upper and take hand away Lower roll should fall into place with upper
roll remaining up above the hood line. If loaded properly, top roll will
not fall for use until bottom roll has been depleted. When servicing
dispenser, full rolls must be used on both spindles to insure proper
All toilet tissue dispensers that meet ADA code cannot have any type
of control delivery ( 416)