Retractable ADA Compliant Shower Bench - Surface Mounted
Seat: Fabricated of 3/4" thick, one piece polymers (white) with all leading
edges having a radius to prevent injury. Seat is secured to frame with
countersunk carriage bolts and acorn nuts.
Tubing: Fabricated of #18 ga stainless steel with #4 satin finish.
Main Frame: 1 1/4" diameter square tubing with capped ends. Underside
has no exposed fasteners. ,
Flanges: #18 gauge stainless steel with four (4) exposed mounting points.
Shower Bench: When mounted properly seat will be 18" above finished
floor with 1/2 adjustability to level seat. WalVfloor design provides
maximum support and equal distribution of weight. Seat has been tested to
maintain a 1300 lb static load.
Overall Size: 28 1/2'W x 13"0 (seating area)
724mm x 330mm
To comply with ADA Code, seat should be mounted at a height 17"-
19" above finished floor. Check all state and local codes for building
requirements. Standard seat will mount at 18" above finished floor.
Recommend in wall mounting on all shower seats. (BP10) Place seat
up against wall making sure the extended part of seat has an offset
no more than 2 1/2" away from wall. Transfer mounting points to
wall surface and drill pilot holes, Secure seat to surface with proper
fasteners per each application. Snugly secure seat to surface and
check seat to be level. If seat is level raise and lower seat to check
path of travel. Finish securing seat after checking seat for proper
operation. When properly mounted seat will support up to 1300 lbs and
will conform with ADA Code 4.21.3 and 4.26.3
Note: Seat has been tested to support a static and drop test load of