Retractable Stainless Steel Corner Shower Seat - Surface Mounted
Seat: Fabricated of #16 gauge stainless steel double pan construction
with a #4 satin finish with heliarc welded seams polished smooth. (Load
capacity: 250 lbs) All corners are beveled.
Support: 1/8" stainless steel formed bracket (exposed mounting) is
secured to wall surface and acts as a support opposite of hinged side.
Hinge: Heavy duty full length stainless steel hinge is welded to 1/8" formed
bracket (exposed mounting) allowing raising and lowering of seat.
Overall Size: 15" x 151/4" x 15" x 1" thick
381mm x 387mm x 381mm x 25mm
U930
Installation
Coordinate with contractor and architectural plans for pipes, vents
etc in wall. Secure seat to proper backing and framing with proper
fasteners per application (Fasteners not supplied) If this seat is being
secured for a security type application, proper security style fasteners
should be used. (Not supplied) Proper mounting height above finished
floor is 17" - 19". Check all state and local building codes.
Select mounting height above finished floor and secure support
bracket with proper fasteners. Position seat at selected height in the
lower position resting on support bracket. When seat is level transfer
mounting points to hinged side. Secure hinged side and test the travel
of the seat.