Seat: Fabricated of 3/4" solid one piece, white HOP (High Density Plastic)
with radius leading edges to prevent injury. Secured to frame by means
of 1/4" stainless steel rivets. Seat material is warp I water resistant and
will not support bacteria or fungi. There are no chemicals that may irritate
Frame: Fabricated of #18 gauge 1 1/4" stainless steel square tubing, #4
satin finish with capped ends. No exposed fasteners. 1" diameter stainless
steel tubing (same material) cross tubing provides added strength and
Mounting Supports: Square tubing (#18 ga) along with #11 gauge
vertical mounting plated with exposed mounting points.
Anti Slip Supports: Frame is equipped with anti slip/ anti scratching
Overall Size: 29 1/2'W x 14 7/8"0
749mm x 378mm
Seating Area: 29 1/2"W x 12 7/8"0
749mm x 327mm
Place tub seat on rim of tub. Make sure seat is square with corner of
the tub area. Transfer mounting points to wall surface. Drill pilot holes
for mounting. Secure tub seat with proper fasteners per application.
When ever possible use concealed in wall backing (BP10 plates)
When seat is not in use in the upright position, seat will pass the 90
degree point and rest against wall. When mounted properly space
between seat and wall will be no greater than 1 1/2".