Retractable ADA Compliant Tub Seat - Surface Mounted
Seat: Fabricated of%" solid one piece, white HDP (High Density Plastic)
with radius leading edges to prevent injury. Secured to frame by means
of X" stainless steel rivets. Seat material is warp I water resistant and
will not support bacteria or fungi. There are no chemicals that may
irritate human skin.
Frame: (#18 ga.) 1X" stainless steel square tubing, #4 satin finish with
capped ends. No exposed fasteners. 1" diameter stainless steel tubing
(same material) cross tubing provides added strength and rigidity
Mounting Supports: Square tubing (#18 ga.) along with (#11 ga.)
vertical mounting plated with exposed mounting points.
Anti-Slip Supports: Frame is equipped with anti-slip I anti-scratching
293/s'W x 18"0
7 46mm x 457mm
Seat ing Area
28 )'2"W x 15)'2"0
724mm x 394mm
Place tub seat on rim of tub. Make sure seat is square with comer of
the tub area. Transfer mounting points to wall surface. Drill pilot holes
for mounting. Secure tub seat with proper fasteners per application.
When ever possible use concealed in wall backing (BP10 plates) for
When seat is not in use in the upright position, seat will pass the 90
degree point and rest against wall. Option to mount seat dip will catch
HDP seat to hold in place. Transfer mounting points to wall surface &
drill pilot holes for mounting. Secure d ip with proper fasteners per
application. When mounted property space between seat and wall will
be no greater than 1.Yi".