Body: FDA approved injection molded polypropylene with Microban
antimicrobial additive. Reinforced steel-on-steel hinge mechanism and
metal mounting chassis. Labeled usage instructions and safety messages
in four languages.
Liner Dispenser: An integral part of body that is standard with each unit.
Pneumatic Cylinder: Concealed penumatic cylinder & hinge structure
provides controlled and smooth open and dose motion.
Safety Straps: Nylon safety strap snap lock fastens to hold child securely
Overall Size: 35 3/16"W x 22 1/4'H x 4'0 (closed) 23 3/16"0 (open)
894mm x 565mm x 102mm (closed), 589mm (open)
Available Colors: Cream & Grey
Optional Braille Label (Not included)
Coordinate installation with architect or contractor to avoid interference
with surrounding objects. Hold unit up to wall and open to verify
there are no obstructions to interfere with operation of station. From
finished floor to the top of the unit closed should be at a height of 48'.
Transfer mounting point locations to wall surface and drill pilot holes.
Secure unit with proper fasteners for each application. (Recommend
a qualified carpenter to install unit) Unit can be lowered with one hand
and into position with less than 5 lbs of force, wall openingut turning or
twisting of wrist. Verify with local codes and type approach (forward or
side) for proper mounting height above finished floor. Unit can support
up to 2001bs when properly installed.
Unit should be cleaned once or more daily with a clean nylon brush
and spray disinfectant.
When properly installed, baby changing stations comply with ASTM
static load performance requirements.