Body: Fabricated of high impact ABS polyethylene with Microban AntiMicrobial
additive, and radius leading edges that prevent injury. Material is
odor resistant and easy to d ean and available in grey. Base is concave
fonned to allow safe and easy changing. Molded graphics and brail comply
with ADA code.
External Wrap: Fabricated of #18 ga stainless steel with a #4 satin finish.
Wrap is reinforced with a full length steel on steel mechanism with #11 ga
mounting plate.
Liner Dispenser: An integral part of body that is standard with each unit
Gas Shocks: Concealed gas spring actuators ensure a safe and smooth
open and close motion.
Safety Straps: Snap lock fasteners to hold child securely in place.
Overall Size: 37"W x 23"H x 4"0 (closed) 19"0 (open)
940mm x 584mm x 102mm (closed) 483mm (open)
Colors Available: Grey



Coordinate installation with architect or contractor to avoid interference
with surrounding objects in and out of wall. Making sure unit is
level, transfer mounting point locations. Drill pilot holes and secure
with proper fasteners for each application. (Recommend a qualified
carpenter to install unit) Unit can be lowered with one hand and into
position with less than 5 bs of force, wall openingut turning or twisting
of wrist Verify with local codes and type approach (forward or side)
for proper mounting height above finished floor. Mounting points are
located on side of unit
Unit should be cleaned once or more daily with a clean nylon brush
and spray disinfectant
When properly installed, baby changing stations comply with ASTM
static load performance requirements.