Body: Fabricated of high impact ABS polyethylene with radius leading
edges that prevent injury. Material is odor resistant and easy to clean and
available in External Wrap: Fabricated of#18 ga stainless steel with a #4
satin finish. Wrap is reinforced with a full length steel on steel mechanism
with #11 ga mounting plate.
Liner Dispenser: An integral part of body that is standard with each unit.
Gas Shocks: Concealed gas spring actuators ensure a safe and smooth
open and close motion.
Safety Straps: Snap lock fasteners to hold child securely in place.
Overall Size: 24 1/4'W x 39 1/2"H x 5 1/4"0 (closed) 31 1/4"0 (open)
616mm x 1003mm x 133mm (closed) 794mm (open)
Wall Opening: 22 1/S"W x 35 3/S"H x 4"0
562mm x 899mm x 102mm
Color Available: Grey
Coordinate installation with architect or contractor to avoid interference
with surrounding objects in and out of wall. Provide a rough wall
opening 22 1/8'W x 35 5/8"H x 4"0. Making sure unit is level, secure
with proper fasteners for each application. (Recommend a qualified
carpenter to install unit) Unit can be lowered with one hand and into
position with less than 5 bs of force, wall openingut turning or twisting
of wrist. Verify with local codes and type approach (forward or side) for
proper mounting height above finished floor.
Unit should be cleaned once or more daily with a clean nylon brush
and spray disinfectant.
When properly installed, baby changing stations comply with ASTM
static load performance requirements.