Body: Fabricated of high impact ABS polyethylene with radius leading
edges that prevent injury. Embedded Mcroban antimicrobial is odor
resistant and easy to clean. Base is concave fonned to allow safe and
Flange: Fabricated of #18 ga stainless steel with a #4 satin finish.
Liner Dispenser: An integral part of body that is standard with each unit.
Pneumatic Cylinder: Concealed penumatic cylinder & hinge structure
provides controlled and smooth open and dose motion.
Flange: #18 gauge stainless steel with a #4 satin finish.
Safety Straps: Snap lock fasteners to hold child securely in place.
Overall Size: 37''W x 23"H x 4 1/4"D (closed) 19 1/4"0 (open)
940mm x 584mm x 108mm (closed) 489mm (open)
Wall Opening: 35 1/2"W x 20 1/2"H x 4"D
902mm x 521mm x 102mm
Colors Available: Cream, Grey
Coordinate installation with architect or contractor to avoid interference
with surrounding objects. Hold unit up to wall and open to verify there
are no obstructions to interfere with operation of station. Provide a
rough wall opening 35 1/2"W x 20 1/2"H x 4"0. Secure unit with proper
fasteners for each application. (Recommend a qualified carpenter to
install unit) Unit can be lowered with one hand and into position with
less than 5 lbs of force, without turning or twisting of wrist. Verify with
local codes and type approach (forward or side) for proper mounting
height above finished floor.
Unit should be cleaned once or more daily with a clean nylon brush
and spray disinfectant.
When properly installed, baby changing stations comply with ASTM
static load performance requirements.