Finished Wall Corner Guard
Corner Guards: Fabricated of #18 gauge stainless steel with a #4 satin
finish on all exposed surfaces with a radius on the leading edge at the 90
degree bend. Bends are available other than 90 on request. Standard leg
sizes are 3 1/2'(89mm) but are available upon request for other sizes. Max
height is 96'. The edges of the legs have a slight bevel for a tighter fill to
wall surface and for safety.
Screw holes: Advise number of holes if required. Standard diameter hole
is 1/4'
Overall Size: 31/2' x 3 1/2" (Advise height required)
Standard Heights: 42", 48" (Other heights available upon request)
Ordering lnfonmation: When ordering UM10 corner guards, be sure to
specify the height and leg size as shown below.
Leg size required: 31/2'
Height required: 48"
Your Model Number: UM10-0348
UM10-0448
Installation
Provide an area on wall surface at desired or specified location.
Transfer mounting points if holes are required and secure with proper
fasteners per application