Toilet Tissue Holder: Fabricated of #16 gauge stainless steel with a satin
finish on all exposed surfaces. Unit is a drawn one-piece construction.
Rim is beveled to fonn a snug frt against wall surface. Back of holder
has welded anchor nuts to accept 1/4"-20 threaded securing rods that is
secured to #11 gauge back plate.
Overall Size: 6114" OD x 4 5/16"D
159mm x 110mm
Wall Opening: 5 3/4'W x 4 3/4"D
146mm x 121mm
Toilet Tissue: One standard roll with a 5 1/4" (133mm) OD.
Coordinate installation with contractor or architect to avoid interference
with pipes, vents, etc. In wall. Provide a wall opening on 5 3/4"
diameter. Wall depth opening will vary per application. Minimum
wall depth required is 4 3/4"D. Measure wall depth and cut threaded
securing rods to proper length. Thread rods into weld nuts on the
back of holder. Place back plate over rods and secure with nuts and
washers. (Nuts and washers not included.)
Toilet Paper Dispensers: All dispensers that are to meet ADA code
cannot have any type of controlled delivery. (416)