Soap Dish: Fabricated of#16 gauge stainless steel with a #4 satin finish
on all exposed surfaces. Unit is drawn one-piece seamless construction.
Outer edge of holder is beveled to provide a snug fit against wall surface.
Back of unit has welded anchor nuts to receive threaded securing rods.
Bottom of soap dish (internal) has raised areas to allow air flow to prevent
soap from sticking to holder.
Overall Size: 7'W x S"H x 2 3/4"0
178mm x 127mm x 70mm
Wall Opening: 5 7/8'W x 3 7/8'H x 2 3/4"0
149mm x 98mm x 70mm
Coordinate installation with contractor and architect to avoid
interference with pipes, vents, etc. In wall. Provide a rough wall
opening 5 7/8'W x 3 7/8"H x 2 3/4"0. Measure the wall depth and cut
the rods to required length. Insert rods though back plate and secure
with washers and nuts. (Washers and nuts not included)